background image

P/N 07823341 Rev B   Page 1

2272PB-07

Double Hood

User Instructions

 CAUTION 

 

Before use, thoroughly read MAXAIR

®

 CAPR

®

 P/N 03521015 User Instruction (received with all CAPR Helmets 

and available at www.maxair-systems.com>SUPPORT>USER INSTRUCTION MANUALS. 

 

      

               

!

                    

               Warning, Caution, or Note

               Part Number                                      NIOSH Number

 

      

               

!

              
               

WARNING                                             

Failure to follow User Instructions P/N 03521015 and the instructions 

contained herein may be hazardous to the user’s health.
Use only if package is received unopened and contents are  

undamaged. If damage is noted, contact the shipper for replacement 

or repair.

 

Prior to using any MAXAIR

®

 System or component, be sure to be 

familiar with the system’s NIOSH approved configuration.

 

DO NOT use if any component is damaged.  If any components are 

damaged or contaminated and therefore unfit for safe and effective 

use, they should be replaced immediately.
Only trained and experienced personnel who have read and  

understand the User Instructions should use MAXAIR Products.

 

The institution using this product in any application is responsible 

for determining the appropriateness of this equipment relative to 

regulatory requirements. Bio-Medical Devices Intl, Inc. does not 

recommend the appropriate systems for a particular institution or 

facility.

 

Use only MAXAIR Systems/ NIOSH approved compatible  

components.

 

NOT for use in atmospheres immediately dangerous to life or health 

(IDLH), and atmospheres containing less than 19.5% oxygen, or 

more than 25% oxygen.

Flammability Level I: fabric may burn if exposed to open flame.

 

Follow current local regulations governing biohazard waste to safely 

dispose of single use MAXAIR Products.
If you need more information, contact your BMDI Sales  

Representative, or call BMDI customer service at 1-800-443-3842.

 

      

               

!

Symbol Definitions

Intended Use

 

 

The MAXAIR CAPR Hood Systems filter aerosolized and droplet 

particulates and provide high level fluid resistance when used with a 

MAXAIR CAPR Powered Air Purifying Respirator (PAPR) Helmet.
Hoods are designed for single use applications.

Standard CA-CAPR-36 System with 2272PB-07 Double 

Hoods

1.  2081-03 Helmet  

(includes 2051-07 SnapOn 

Cage, 2071-08 Liner, 2590-05 

Power Cord)

2. 2272PB-07 Hoods  

with 2172-97 HLF*

3. 2500-36TSC Battery**

4. 2000-76 Battery Belt

5. 2600-02 Battery Charger***

*One 2172-97 (03731006) HLF is included with each Hood 

**Alternate Batteries include the 2500-37TSC and 2500-30TSC. 

***Alternate chargers include the 2600-01.

 

Regulatory 

 

NIOSH 

 

1

5

3

2

4

Specifications

Recommended System Temperature Limits

 

Use/Handling: 0

o

C to 54

0

C at a maximum 80% Relative Humidity. 

Charging: 0

o

C to 45

0

C at a maximum 80% Relative Humidity. 

Storage: 0

o

C to 35

0

C at a maximum 80% Relative Humidity.

MATERIAL

TYPE

FLUID RESISTANCE

Body (Shroud) Polypropylene 

ASTM F1671

Lens

Polycarbonate

ASTM F1671

Hood Filter

Polypropylene

AATCC TM127

HLF

Nanowave pleated  

polypropylene

General particle filter 

material

P/N 2272PB-07SM

(Small-Medium)

REF 07831173

P/N 2272PB-07ML

(Medium-Large)

P/N 07831202

P/N 2172-97 HLF

REF 03731006

Содержание CAPR 2272PB-07

Страница 1: ...mospheres containing less than 19 5 oxygen or more than 25 oxygen Flammability Level I fabric may burn if exposed to open flame Follow current local regulations governing biohazard waste to safely dispose of single use MAXAIR Products If you need more information contact your BMDI Sales Representative or call BMDI customer service at 1 800 443 3842 Symbol Definitions Intended Use The MAXAIR CAPR H...

Страница 2: ...ood over the Helmet down to within about 1 2 inches from the top rear Helmet Snap 7 If the Hood Filter is folded over the front Velcro Strip flip the fold up to expose the Velcro Strip Pull the Hood down fur ther in back to remove the wrinkles from the Hood Filter over the Helmet top 8 Connect Helmet Power Cord to Battery Push Power Cord Connector into Battery Receptacle until Secure Connection au...

Страница 3: ...ely or ALTERNATIVELY temporarily leave it on and proceed to Doff with Hood next section 1 Begin HLF doffing by curling its back bottom up over Helmet back bottom Doff HLF 3 Place back of outer Shroud over Helmet and don outer gown per gown manufacturer s protocol Place inner Shroud inside outer gown and close gown Pull outer shroud down all around gown 4 Pull Neck ties loose from behind pull them ...

Страница 4: ...iscard appropriately 4 Continue to roll up both Shrouds inside over outside up and over Helmet 5 Unsnap each side attach ment and continue moving rolled Hood forward and off front Helmet Mounting Post 6 With Hood completely off Helmet discard appropriately 10 Unbuckle Belt and remove Battery and Belt from around the waste 7 Doff body gown per gown manufacturer s protocol and discard appropriately ...

Отзывы: