© 2017 - MaxAir Trampolines, LLC
Document May Not Be Reproduced Without the Consent of MaxAir Trampolines, LLC
Page 14
7’ x 14’ flfLybed tramp
These plans are for reference ONLY and are not the technical installation plans
1. ORGANIZE YOUR PADDING AND PREP FOR INSTALLATION
Layout foam pieces to figure out which pieces go where, refer to TRAMPOLINE PAD INSTALLATION
diagram (page 15). Generally, if one side of your trampoline is longer than 8’ you will be required to glue two
pieces of equal length together to make a complete pad. For instance if you have a 7’ x 14’ trampoline, you
will be required to glue together (2) 7’ sections in order to make the 14’ pad. The 7’ section would come as
a whole complete piece since it is under 8’.
2. GLUE THE LONG SIDE PADDING TOGETHER
Once your pads have been organized for where they will be positioned around the trampoline:
A - Spray glue both ends of the 2 pads where they will attach to each other, in the middle. (If you don’t
understand this step, re-read step number 1 and/or see diagram on page 15).
B - Let sit until tacky for 1-2 minutes.
C - Put both pieces together and allow to sit for 30 minutes.
3. INSERT FOAM INTO VINYL COVERS
After the glued-together foam pieces have sat for 30 minutes or more, stuff pads into their vinyl covers.
If you have premium padding 9” thick then proceed to step 5. If you have deluxe then go to step 4.
4. INSERT 1.25” THICK CLOSED CELL FOAM SPACERS
A - Stuff the included 1.25” thick, closed cell foam into the vinyl padding covers, underneath the larger foam
pieces, and toward the outer edge (zipper side) of padding (Closed Cell Foam should not be under the nose
or slanted portion of the padding).
B - Please be sure that closed cell foam is placed under all the deluxe padding and zip closed.
5. ALIGN PADDING AND SECURE WITH VELCRO STRAPS.
A - Align your padding around the trampoline.
B - Place velcro straps onto corner and side bags where they meet. You will notice that there will be an area
where velcro is already sewn onto the vinyl bags.
TIP:
You will want to put the notched velcro on first and then place the non-notched piece on second.
(
See diagram on page 16
)
TRAMPOLINE PAD INSTALLATION (FOR PREMIUM AND DELUXE PADS ONLY)
