MAXA N-P35A2, Руководство пользователя и инсталлятора

Страница: 31 / 34

30
● Install the hose at the rear clip
Aim the opening of hose at the round mouth of rear clip, rotate the hose
anticlockwise into the rear clip.
House
Rear clip
● Install the hose at the joint 1
Aim the opening of hose at the round mouth of joint 1, rotate the hose
anticlockwise into the joint 1.
House
Joint 1
● Connect rear plate 1 and rear plate 2
Fix the adjustable plate at the sliding groove of rear plate 1, put the
adjustable plate into the rear plate to enable the adjustable plate slide
inside the rear plate, then connect the rear plate 2 and fix the rear plate 1
and 2 with screw. Adjust the distance between rear plate 1 and rear plate
2 according to the required installation height.
Vite
sliding groove of rear plate
adjustable plate
The length of rear plate 1 and rear plate 2 can be adjusted according to
user’s requirement. Loosen the screws fixing the rear plate 1, rear plate 2
and adjustable plate to move the rear plate 2 and adjustable plate (can
slide freely in the sliding groove of rear plate 1 and rear plate 2) to the
required length, and then fix the rear plate 1 and rear plate 2 with screws.
screw
This length can be adjusted according
to user’s requirement
rear plate 1
rear plate 2
screw
adjustable plate
(can slide in the
sliding groove of
rear plate 1 and
rear plate 2)
● Install protective grille
Aim the protective grille at the air outlet of rear plate 1 and then press the
clasp of protective grille inwards to fasten the rear plate 1.
clasp of protective
grille
screw
● Install the exhaust hose sub-assy at the rear plate
Aim the rear clip of exhaust hose sub-assy at the air outlet of rear plate 1 and then press the clasp of rear clip into the
groove of protective grille firmly.
screw
screw
clasp of protective grille
rear clip