MAXA N-P35A2, Руководство пользователя и инсталлятора

Страница: 29 / 34

28
- If the inner width of the window is between 36.8" (934mm) and 48"
(1219mm) inclusive.
(1) Attach the extension panel to the adjustment panel.
(2) Open the window sash and place the window panel on the window
stool.
(3) Slide the adjustment and extension panels to fit the window frame
width.
(4) Secure the window panel to the window stool with 4 screws.
Extension panel
36.8"~48"
4. Cut the foam seal (adhesive type) to the proper length and attach
it on the top of the window panel.
5. Close the window sash securely against the window.
6. Cut the foam seal to an appropriate length and seal the open gap
between the top window sash and the outer window sash.
Foam seal A
(adhesive type)
7. Attach a bracket with the screw.
Bracket
● Installation in a sliding sash window
1. Attach the guard combined above to the window panel
Push the insect guard net firmly to ensure that its four projections fit into
the holes in the window panel.
Projection
2. Cut the foam seal A (adhesive type) to the proper length and
attach it to the window frame.
Foam seal A
(adehesive type)
3. Attach the window slider kit to the window stool.
If the inner height of the window is between 22"(559mm) and 24"(609mm)
inclusive.
The window panel cannot be installed in windows less than 22"(559mm)
high, as you will be unable to shut the exhaust cover.
(1) Remove the adjustment panel from the window panel, and cut the
window panel to the same height as the window.
(2) Open the window sash and place the window panel on the window
frame.
(3) Secure the window panel to the window frame with 2 screws.
Cut
Window
panel
22"~24"