5
Maxa Technologies Ltd
MT-200E WIFI manual
Ver1.1
Please note port 9100 is used for proper communication so Wireless router needs to have this port
open and diverted to printer IP address, in below sample it is 192.168.0.254.
Printer communication in Infrastructure mode can be checked using Printer driver by using
‘Print Test Page’ in General Tab or dedicated Function Check tool:
FunctionCheck- IP connection tester
2. Direct communication without printer driver.
Below conditions needs to be met for proper printout without system driver:
-
Port 9100 needs to be open in system firewall and router set port forwarding to IP
address of the printer
-
Files needs to be send to the printer using printer IP address in ESC/POS format
Above instructions are written for Windows operating systems so Windows driver and function
check cannot be used in other systems, please use ping utility instead to check if printer is accessible
in the network. There is no driver available for other systems, please use manufacturer’s SDK:
Android SDK 1.060C
iOS SDK 1.48
