Torque dial
2
This dial allows you to adjust wire tension
torque slightly.
To increase the tension, turn it in the coun-
terclockwise.
To decrease the tension, turn it in the
clockwise.
3
Insert the charged battery pack into the tool
until a click is heard.
•
When setting the main switch to ON, ab-
solutely do not bring your hand close to
the binding part or rotating part of the tip
of the tool.
4
Set the Trigger Lock to UNLOCK and turn
on the main switch.
Reinforcing bars
Appropriate
Over-tightened
5
Test the tool again to check the tie strength.
6
If the tie strength is not appropriate, repeat
procedures
1
~
5
.
WARNING
21