- 8 -
HOW TO SET UP
SETTING OR CHANGING DATA
Operation
1.
Press “CANCEL” key for 3 sec. or more. The symbol appears on the display.
2.
After all changed data in each mode are registered, press the “CANCEL” key again.
The symbol disappears.
Password protection for settings
Password is able to set up to protect settings. The password is required for settings or changing data after it has
been set up in setting OPTION. (See [10 ] on page 18)
Making note of the “Password” and keep it in a safe
place to prevent it from being lost or used by an un-
authorized person.
If you do not touch any keys for 60 seconds,
the symbol disappears automatically.
BASIC OPERATION OF SETTING OR CHANGING DATA
Operation
1. Press
the
“CANCEL”
key for 3sec. or more. The symbol appears on the display to indicate the setting
mode is on. If password has been set up, enter the password before into the setting mode.
2. Press
“MODE 1,”
“MODE 2,”
“MODE 3”
or
“OPTION”
key to select setting mode.
Then first setting item (
CODE 01
) is displayed.
3. Press
“
(BACKWARD)”
or
“
(FORWARD)”
key to select setting item.
4. Press
“
(INCREASE)”
or
“ (DECREASE)”
key to change data. (The changeable data blinks.)
5.
If the changed data is OK, press
“
(BACKWARD)”
or
“
(FORWARD)”
key to move to next setting item.
6. Press
“SET”
key to register all changed data and to return the start of setting mode. Alternatively, you can
press
“
(FORWARD)”
key in last setting item to register all changed data and to return to the
start of set-
ting mode
.
By pressing
“CANCEL”
key during setting, you can return to the start of setting
mode without registration.
