Max-Thrust Mini Viper Jet, Сборка и руководство по эксплуатации

Страница: 6 / 12

Fig. 14 - The photo shows the finished view
after gluing the horizontal stabilizers in place.
Fig. 17 - The photo shows the finished view
after gluing the vertical stabilizers in place.
Fig. 15 - Apply glue to the base of the Vertical
Stabilizer.
Fig. 18 - Install the elevator control horn,
ensuring the screws are screwed through the
control surface into the support plate.
Fig. 16 - Apply glue to the slot of where the
vertical stabilizer sits.
Fig. 19 - Connect the push rods to the elevator
servo arm and then to the elevator control horn
14
15
16
18
19
17