Max-Thrust Mini Viper Jet, Сборка и руководство по эксплуатации

Страница: 11 / 12

Fig. 34 - Congratulations, you have completed the assembly process. We
hope you enjoy flying your new model
Test Flying - Notes on flying the airplane
- For the first flight you should wait for a relatively calm day with no more
than a gentle breeze.
- A good flying site is a large, flat, open field; well away from trees, fences,
high-tension overhead cables and other potentially dangerous obstacles.
- Carry out a complete check of the working systems.
- We recommend that you ask an experienced modeler to help you initially;
to give the model a fairly powerful hand-launch.
- The model must be launched directly into any existing wind.
- Switch the motor on, and launch the airplane strongly into the wind, with
the fuselage and wings leveled.
- Allow the Viper to fly straight and level initially; don’t try to turn it when it is
close to the ground.
Adjust the trims if necessary so that the model settles into a steady climb.
- Check the model’s response to control commands from the transmitter.
- You may need to increase or reduce the control surface travels once the
model is back on the ground.
- Take the airplane up to a safe height and check its stalling speed.
- Keep the speed well up on the landing approach to avoid stalling.
- If you had to move the trims during the flight, correct the mechanical
linkages before flying again. This allows you to re-centre the trims, so that
full trim travel is available for subsequent flights.
- We reserve the right to introduce technical modifications and suggest that
you check our website for updates.
34