MAX POWER
DATE
DATE
POWER
PART NO.
REVISION
3RD ANGLE PROJECTION
Thrust plate instalation
Thrust plate
Hull parts
Thruster parts
Thrust pad
Lateral thrust when in action on an R600
can be enormous. For this reason the unit
uses a thrust plate system.
This system is essentially comprised of
two parts.
1 The reinforced hull plates to be
manufactured by the shipyard and
2 The adjustable thrust pads are
supplied by max power, but will need
adjustment to suit the thrust pads.
The thrust pads must be at exactly 90° to
the hull flange and strong enough to
support at least a one-tone load.
The thruster is first installed with the thrust
pads removed.
The distance between the plate and the
pad seat is then measured; lastly the pads
are machined to fit and reinstalled.
90,00°
- 25 INSTALLATION MANUAL RETRACT R 600
