MAX POWER
II.
TEST RESULT FORM (part 1)
This form must be filled out and faxed to MAX POWER within a week after launching
so that the MAX POWER standard warranty is validated.
MAX POWER
Via Philips 5, 20900 Monza (MI)
Italy
Tel : (3
9
)
039 200 1973-936
Fax : (3
9
)
039 2004299
From
:
………………………………
………………………………
………………………………
………………………………
………………………………
………………………………
………………………………
Date : …………………………
REFERENCE : S _ _ .R3 _ . _ _ _ _
→
Shipyard that installed the RETRACT :
………………………………………………
→
Name of the Project Manager :
………………………………………………………..
→
Name of the Vessel :
…………………………………………………………………..
→
Type & Make of the Vessel :
…………………………………………………………..
→
Date of launching :
……………………………………………………………………...
Please answer by YES or NO the following questions concerning the installation :
YES NO
1 Is the RETRACT mounted parallel with the bottom of the hull ?
2 Is there enough room for general maintenance of the RETRACT and its auxiliary
equipment ?
3 Does the closing plate rest upon a flexible gasket ?
4 Is the adjustment of the closing plate done in such a way that no light is allowed to
enter ?
5 Are the anodes correctly fitted to the closing plate supports ?
6 Is the lube oil reservoir mounted at a minimum of 1000 mm (39
″
) above the
waterline ?
7 The RETRACT is not glued to the mounting base ?
8 Does the electropump have adequate cooling and is the oil reservoir mounted
above ?
9 Is the soft start adjusted /100 bars ?
10 Are all electrical wires numbered at each end and with their terminals tinned ?
11 Is the electrical supply to the remote control box stabilised and independent ?
18
INSTALLATION MANUAL RETRACT R 300
