background image

2

         

max

 mobility 

®

Do not operate over significantly rough terrain, very 

slick surfaces, extreme slopes, or loose ground. This 

cables. It is strongly recommended that a seat cushion be 

used on your wheelchair when using the buttons.
The SmartDrive and PushTracker have passed industry 

climate testing the same as power wheelchairs, and are con-

sidered rain / splash proof. Complete submersion of either 

may cause malfunction or damage and void the warranty. 

Take the PushTracker off prior to bathing or showering.
Surface temperatures of the SmartDrive can increase and 

become hot to the touch when exposed to external sources 

of heat, such as sunlight.
Using Anti-Tippers substantially reduces your risk of fall-

ing over backwards, which can cause serious injury. If you 

are afraid of tipping over, use anti-tipppers. Anti-Tippers 

will keep you from falling over, but they will limit your 

ability to be pulled up curbs and some other maneuvers. 

Just as children learn to ride bikes without training wheels, 

you may be able to learn to use your wheelchair with Anti-

Tippers. It is STRONGLY recommended that Anti-

Tippers be employed to the wheelchair until the user has 

become accustomed to operating the SmartDrive in all 

possible environments,  situations, and conditions.
Do not tip or wheel your wheelchair without assistance, 

unless you are highly skilled.
Do not shift your weight or sitting position toward the 

direction you are reaching as one’s wheelchair may tip over 

backwards or sideways.
Do not lean over the top of the back upholstery to reach 

objects behind as this may cause the wheelchair to tip over.
Do not stand on the frame of your wheelchair.
Your wheelchair is not designed for weight training and 

is unsafe from use as a seat while weight training. Weight 

training from your wheelchair substantially changes the 

stability of your chair and may cause tipping.
Do not attempt to stop a moving wheelchair with wheel 

locks. Wheel locks are not brakes.
Do not take a SmartDrive attached wheelchair on an esca-

lator or moving walkway. Serious bodily injury may occur.

may cause a loss of traction, leading to injury or damage to 

your SmartDrive and void the warranty.
The SmartDrive is not designed to drive up or down large 

curbs / steps. Only perform this maneuver when absolutely 

necessary and always ask for help. Also be sure to turn OFF 

the power assist [via PushTracker] before maneuvering.
Use extreme caution when operating a SmartDrive at-

tached wheelchair when near streets. Consider turning 

OFF the power assist [via PushTracker] to reduce risk.
When crossing major roads, intersection, railway crossings 

or highways as well as when you drive steep, long slopes 

you should always consider having somebody accompany 

you in the interest of your safety.
With regards to driving up and down slopes, please adhere 

to the instructions and specifications given by the diverse 

wheelchair manufacturers. 
Riding over curbs or obstacles can cause tipping and seri-

ous bodily harm. Turn OFF the power assist [via Push-

Tracker] when attempting to ride in these situations. If 

you have any doubt that you can safely cross any curb or 

obstacle, ALWAYS ask for help. Be aware of your riding 

skills and personal limitations. Develop new skills only 

with the help of a companion.
The PushTracker should ONLY be worn by the user sitting 

in the wheelchair with the SmartDrive attached.
Use caution when operating a SmartDrive attached wheel-

chair indoors or in confined areas. Consider turning OFF 

the power assist [via PushTracker] to reduce the chance of 

damage or injury.
Always turn OFF the power assist [via PushTracker] when 

parked to prevent accidental activation.
Always turn OFF the power assist [via PushTracker] be-

fore taking the PushTracker off of your wrist.
Always use caution when transferring in or out of the 

wheelchair. Every precaution should be taken to reduce 

the transfer distance and be certain the wheel locks are 

engaged to prevent the wheels from moving. Also always 

make sure the power assist is OFF [via PushTracker] when  

             transferring to and from your chair.

The optional buttons are designed to be used with 

a seat cushion as to prevent sitting directly on the 

Any unauthorized modifications to the SmartDrive 

will void the warranty and may create a safety hazard.

NOTES:  Figures and diagrams of the SmartDrive in this manual may vary slightly from your device.

 
 

The Serial Number of your SmartDrive is located on its underside. It is recommended that you save this User’s Manual and    

 

record the Serial Number below for future reference.

SmartDrive Serial Number:

  _______________________________________

 

Содержание SDMX2-DUM
















Отзывы: