Click
IMPORTANT
If the battery has not been used for more than a week, it enters into standby
mode to save power and to protect the battery . Place the battery in the charger
for approx . 15 seconds to exit the standby mode before use .
Please note that there is no audio signal to indicate the standby mode or to
indicate exit of standby mode . If there is still no power after exit of standby
mode, the battery needs to be charged . The battery must be recharged every 6
months .
Place the battery in the charger . Make sure
the battery lock clicks into place .
A mounting instruction
for the battery charger is
included and can also be
downloaded from
www .pressalit .com .
!
CAUTION
When the battery is running low, a beep tone is heard when you operate the
remote control . Although there is still enough power to raise or lower the unit,
it is of utmost importance that you charge or replace the battery immediately .
Failure to do so will soon cause the lifting function to stop working .
+45 87 88 87 88
+45 87 88 87 89
www.pressalit.com
Telephone:
Telefax:
E-mail:
Web:
Pressalit
Pressalitvej 1
DK 8680 Ry
Danmark
Monteringsvejledning
DK
Montageanleitung
DE
Mounting instruction
EN
Notice de montage
FR
Montage-voorschrift
NL
Monteringsanvisning
SV
Monteringsveiledning
NO
Subject to alteration without further notice · Ret til ændringer forbeholdes · Recht auf Änderungen sind vorbehalten
Nous nous réservons le droit d’apporter toutes modifications pour l’amélioration de nous produits sans préavis · Wijzigingen voorbehouden
Rätten till ändringar förbehålles · Vi forbeholder oss rett til endringer · Salvo variaciones
Instrucciones de montaje
ES
max-ability.com 800.577.1555 [email protected]
18
