Mauser MI5530, Инструкция по эксплуатации

Страница: 11 / 82

①
②
④
③
⑤
⑥
2
3.给HR装置供油
1 .为 了防止 布纤维 或线被 切断， 请尽早 给 HR 装置 供
油。
注： 关于购 买硅酯 油，请 咨询缝 纫机代 销店或 本公司
营业 所联系 。
1
)
Fill the HR device with oil be for it is too low in order
to prevent needle thread breakage and fabric damage
.
Note
:
Use Pegasus recommended silicon oil. ( UNION
CARBIDE CORPORATION) UCC L
-
45
(
350
)
4.穿线的方法
Threading
1)请掀起护眼板,打开机盖.
2 )摁压(弯针挑 线器会跳出来)
3 )把机上原有的线 与缝纫用线绑 结在一起.
4 )穿好线后将弯针 挑线器推回原 位.
5) 针 线(将线拉 到针眼前,剪掉结 头再次穿好针 线)
6 )弯针线上装饰线(直到拉出 接头过来后,用剪 刀剪
齐接 头,整齐.
7 )若机上原来没有 线,请参照 穿线图正确进 行穿线.
1) Open the guard and three covers
.
2
)
Press down
.(
The looper thread take
-
up after threading
.
3
)
Kont the preset thread and the thread being used
together to thread the machine
.
4
)
replace the looper thread take
-
up after threading
.
5
)
Needle thread Trim the knots off neatly before passing
through the eye of the needle to rethread
.
6
)
Looper thread
,
Top cover thread Trim the knots
off neatly after passing through the eye of the looper
.
7
)
Be sure to thread the machine correctly by referring
to the threading diagram
.
Filling the HR device with silicon oil
使用说明书
Operation Instruction