Maunfeld MVCE59.3HL.1DZ.R-BK, Инструкция по эксплуатации

Страница: 22 / 40

21
MAINTENANCE AND CLEANING
Switch-off the appliance before cleaning
Do not clean the hob if the glass is hot: risk of burn.

Remove light marks with a damp cloth with washing up liquid diluted in a little water.
Then rinse with cold water and dry the surface thoroughly.

Highly corrosive or abrasive detergents and cleaning equipment are likely to cause
scratches and must be avoided.

Do not ever use any steam-driven or pressure appliance.

Do not use any object that may scratch the ceramic.

Ensure that the bottom of pans is dry and clean. Ensure that there are no grains of dust
on your ceramic hob or on the bottom of the pan. Sliding rough saucepans will scratch
the surface.

Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent
the surface being damaged.
WHAT TO DO IN CASE OF A PROBLEM
The hob or the cooking zone doesn’t start-up:

The hob is badly connected to the electrical system.

The protection fuse has blown.

The sensitive keys are covered by grease or water.

An object is covering the control panel.
The symbol [ E ] displays:

Call the After-sales Service.
One or all cooking zones cut-off:

The safety system has engaged

You forgot to cut-off the cooking zone for a long time.

One or more sensitive keys are covered.
The symbol [ L ] displays:

Refer to the chapter “Control panel locking”.
The control panel displays [ Er03 ] :

An object or liquid covers the control keys. The symbol disappear as soon as the key is
released or cleaned.
The control panel displays [ ER21 ] :

The hob is overheated, let it cool and then turn it on again.
The control panel displays [ U400 ], [ Er25 ]or [ U4 ] :

The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, call the SAV.