Matthews VIAcode T100, Руководство пользователя

Страница: 27 / 47

23
T50/T100 PTM – User Guide – Version 2 Issue 1
Installation – Commissioning a T50/T100 PTM
11. Press and hold the
Prime
button on the back of the print head for five seconds and then
release it. A distinct sound can be heard when the
Prime
sequence starts, allow the
sequence to complete.
Note: The prime function pumps ink to the nozzles and takes approximately thirty
seconds to complete.
12. Make a test print and verify that a satisfactory printout is produced. If the quality of print is
poor refer to and follow the procedure for
“Purging Trapped Air”
on page 29.
It is recommended that the
Gutter Clean Interval
is used. This ensures that the gutter at the
bottom of the PTM’s nozzles is kept clean and avoids ink build-up.
The
Gutter Clean Interval
is set from within the PCM’s
Configuration
menu. First select
Print Heads,
then the relevant
Marker,
and finally its
Advanced
options. For further
information refer to the PCM’s Technical Manual.