ClOSE-TO-CEILING INSTAllATION
1. Remove the decorative
canopy bottom cover
from the canopy. (Fig. 8)
2. Pass the
120-volt supply wires through
the
center hole in the ceiling
hanger bracket as
shown in Fig. 5.
3. Secure the hanger bracket to the ceiling outlet
box with the screws and washers provided with
your outlet box.
4. Remove
three
of the
six screws
and
lock
washers (every other one) from the collar of top
motor. (Fig. 9)
5. Place the ceiling canopy over the collar at the
top of the motor. Align the mounting holes with
the holes in the motor and fasten using the
screws and lock washers provided (Fig. 9).
6. Tighten the mounting screws securely. (Fig. 9)
WARNING:
Failure to completely tighten the three
screws in step 5 could result in fan loosening and
possibly falling.
Collar
\
a,
7
H'"'.'
=~=~
____
'.-
Canopy bottom cover
Figure 8
f.
r
1t.--
Screw and
:~.
Lockwasher
i !!
(3 of 6 places)
I
I
I
I
I
I
I
I
I
\
a
0
/_
•••
__
Canopy
'=;=:
==;===r: -
I
I
I
I
I
I
~
O!
7. Hang the fan on the hook of the hanger bracket.
Be certain that the canopy is fully locked into
hook as shown in Fig. 10. This will allow you to
make the electrical connections.
5
Figure 9
Figure 10
