
Matter Surfaces | +1 212 252 2049 | [email protected] | mattersurfaces.com
Manual Cleaning:
Regular Cleaning
1. Start by vacuum cleaning.
2. If needed, use a scrubbing brush, warm
water and all-purpose cleaner with a pH
of 7–8.
3. Absorb the water with a soft cloth/
microfiber cloth.
Manual Cleaning:
Zeroing
1. Start by vacuum cleaning.
2. Remove any difficult stains, see STAIN
REMOVAL.
3. Use a scrub brush, warm water and an
alkaline all-purpose cleaner with a pH of
9–11.
4. Scrub the floor and leave to work for
5–10 minutes. Scrub it again and absorb
the water with a soft microfiber cloth or
a wet vacuum cleaner. Rinse with clean
water and wipe the floor until all cleaner
is removed.