BLADE
9-4
TI215G0010
CHECK OF OIL LEvEL
With compressor not operating and without pressure in
the chamber the oil level should touch the filling nozzle.
CLEANING AND/OR REpLACING THE AIR
SUCTION FILTER
The filter cartridge is integrated to the cover itself.
Turn the filter cap counterclockwise (Pict. 1); withdraw
the filtering cartridge (Pict. 2); clean the cartridge with
compressed air. Direct the air jet to the inside of the
cartridge. To reassemble apply the reverse procedure of
the disassembly.
1
2
CLEANING THE AIR/OIL RADIATOR
The radiator is in the machine body. The cooling flow
goes through the radiator from the inside to the outside
of the machine. Hence blow a jet of compressed air
through the radiator on the side of the opening of the
cooling air exhaust. Remove any dirt that has come from
the inside of the machine body.
CLEANING THE pRE-FILTER
The machine is equipped with a pre-filter to remove
dust and is articulated by the inflow of air.
It glides on metallic guides in the rear door and should
be withdrawn from its housing for replacement or
cleaning purposes.
It filters the suction air and washes the compressor while
preventing foreign matters from entering the machine.
REpLACEMENT OF OIL FILTER ELEMENT
Replace the oil filter element each time the oil is
changed. Be sure that the machine is switched off.
Dismantle the filter element (Pict. 3 - pos. 1) by using
chain tongs and replace it with a new unit. Before
locking the filter element, lubricate the gasket. Screw
the new filter element manually.
REpLACEMENT OF THE AIR-OIL SEpARATOR
FILTER ELEMENT
Be sure that the machine is switched off. Open the
inspection panel. Dismantle the filter element (Pict. 3 -
pos. 2) by using chain tongs and replace it with a new
unit. Before locking the filter element, lubricate the
gasket. Screw the new filter element manually.
Maintenance
