Matsusada EC Series, Инструкция по эксплуатации

Страница: 14 / 20

8
g. Output voltage monitor
±10V output for the maximum rated output voltage. Output impedance is 1k ohm. The
polarity of monitor output is identical to that of high voltage output.
h. POWER ON status signal
Connection of internal relay is on when Power switch is on. Acceptance voltage for
relay connection is 30Vdc max, acceptance current for relay connection is 100mA max.
i. Over current status signal
TTL signal (L) output when output is in over current status.
j. Local/Remote status signal
TTL signal output for status of Local or Remote.
3.Operation Manual
COM
⑤
V
COM
⑱
V
CH①
Vmoni
CH②
Vmoni
③ ⑯
⑫
25
R O C A L
REMOTE …… TTL (H)
…… TTL (L)