Matsusada AMPS Series, Инструкция по эксплуатации

Страница: 20 / 27

13
4-6 Output current monitor
10V(positive 10V, negative output→-10V) is output from the front panel output
current monitor when operated with rated output peak current.
The output impedance is 1kΩ
Up to 5kHz Bandwidth .
※ For circuit reasons , noise of about 25kHz / 0.5Vp-p will remain at the output current monitor .
4-7 Output peak current
Output peak current of around 3 times * more than rating can be obtained.
It suppresses the distortion of waveform with capacitive load.
Peak allowable time is 1ms.
4 Instructions for operation
I
M
【Front Panel】
Max 1ms
Iout
Vout
60mApk
< 20mA
0
0
Im=±10V/Iout=±peak current
（ all model ）
Im=±5V/Iout=rated current
( model AMPS-0.4B2000, AMPS-0.6B2000)
( model AMPS-2B200, AMPS-5B80)
Im=±3.3V/Iout=rated current
( model AMPS-10B40, AMPS-20B20)
* around 2 times
/ model AMPS-0.4B2000, AMPS-0.6B2000
AMPS-2B200, AMPS-5B80
Ext. AMPS-20B20
If the peak current time is long or the
average current exceeds the rated
current, the current protection will be
effective and cut off.
In such cases, we recommend reducing
the peak time or voltage, or adding a
resistor in series with the capacitive load
to reduce the peak current.