Getting started
This section provides information on how to set up and start using your DTAR10 once you have connected up as
described on page 2. For further details on using your DTAR10 see the other sections in this manual.
1 Insert batteries in the remote
Remove the cover on the rear of the remote control and insert two ‘AA’ size batteries. Ensure you insert them the
correct way round as shown inside the battery compartment. Replace the cover.
2 Switch the unit on
3 View digital TV
With the unit connected to the power you should see the green light on the front
panel indicating the unit is on.
1. Switch on your TV. You should see the Setup screen. If you do not see the
Setup screen you may have to select AV or similar on your TV remote.
2. Press OK on your remote to start a search to find all the free digital
channels available in your area. Press the green button (OK) when the
search is finished. You see the first channel displayed on screen.
Once a search for channels has been completed you can watch any of the stored digital channels as follows:
1. Press the DTV button at any time or if viewing the menu on screen, press Exit repeatedly until you see a
channel on the screen.
2. Change to another channel by using one of the following methods:
• press the number of the channel you want
• press the up or down arrow keys and press OK to select
• press GUIDE and use the up, down and OK keys, see TV Guide on page 7.
5
