1. Lay the portable power source front side down. On the back
of the unit, locate the screws that hold the portable power
source enclosure together.
2. Remove the screws, then lift off the back lid of the portable
power source enclosure.
3. On the top of the battery are two terminals, each with wires
connected to them. Disconnect these wires from the battery
by removing the bolts that hold them to the battery
terminals. Be careful not to touch both the battery terminals
with the tools being used to remove the bolts to prevent
accidental arcing.
4. Lift the battery out of the front of the enclosure.
LIMITED WARRANTY
Matson Automotive Industries Pty Ltd warrants the product for
one year from the date of original retail purchase, for faults
arising from defective workmanship or materials that may
develop under normal working conditions and proper use. The
Company will repair the product at no charge for parts and
labour.
The Warranty does not operate where:
a) The customer fails to provide documentary evidence of date
of purchase and delivery of the product.
b) The product has been altered, abused, misused, worn out or
used for a purpose other than which it was intended.
c) The product has been used in a manner inconsistent with
any instructions regarding its use.
d) Unauthorised repairs, alterations or modifications have been
made to the appliance.
e) The product has been improperly packaged and damaged
when returned for repair.
The Warranty excludes fair wear and tear, damage arising from
circumstances outside the control of Matson Automotive
Industries Pty Ltd, including without limitation, faulty
installation. This warranty applies to the product only and does
not apply to any accessory items included with the product or
product parts which are subject to wear from usage, including,
but not limited to, clamps and cables; the replacement or repair
of these items shall be at the expense of the owner. This
warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.