MATSONIC MS9317E Series, Руководство пользователя

Страница: 19 / 42

2: Mainboard Installation
15
1. On the mainboard, locate the VGA1 header for this bracket.
2. Plug the cable from the bracket into the header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket into the slot.
Use the screw that held the blanking plate to secure the
extension bracket.
Optional Extension Brackets
For this mainboard, you can also obtain a USB module extension
bracket for more USB ports. Install them by following the steps
below.
Note: All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.
Extended USB Module
This module bracket has four USB ports for more USB devices
(USB port 3-6).
1. Locate the USB1/USB2 header on the mainboard.
2. Plug the bracket cable onto the USB1/USB2 header.
3. In the system chassis, remove one slot cover from expansion
slots and install the extension bracket in the opening. Use the
screw that held the slot cover to secure the extension bracket in
the chassis.