25
Load Best Performance Settings
If you select this item and press
Enter
a dialog box appears. If you
press
Y
, and then
Enter
, the Setup Utility loads a set of best-
performance default values. These default values are quite
demanding and your system might not function properly if you are
using slower memory chips or other low-performance components.
Features Setup Page
This page sets up some parameters for those peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
Enabled
OnBoard Serial PortA
3F8h/COM1
OnBoard IR Port
Disabled
OnBoard Parallel Port
378h
Parallel Port Mode
ECP
Parallel Port IRQ
7
Parallel Port DMA
3
OnBoard SATA IDE
Enabled
Audio Device
Enabled
Modem Device
Auto
Ethernet Device
Enabled
USB Controller
Enabled
USB Function for DOS
Disabled
ThumbDrive for DOS
Disabled
ESC : Quit
↑↓←→
: Select
Item
F1 : Help PU/PD/+/ - : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
OnBoard FDC
Use this item to enable or disable the
onboard floppy disk drive interface.
OnBoard Serial
PortA
Use this item to enable or disable the
onboard COM1 serial port, and to assign a
port address.
OnBoard IR
Port
Use this item to enable or disable the
onboard infrared port, and to assign a port
address.
Parallel Port
Mode
Use this item to set the parallel port mode.
You can select SPP (Standard Parallel
Port), ECP (Extended Capabilities Port),
EPP (Enhanced Parallel Port), or ECP +
EPP.
