13
Pin Signal
Pin Signal
1
VERG_FP_USBPWR0 2
VERG_FP_USBPWR0
3
USB_FP_P0-
4
USB_FP_P1-
5
US
6
US
7
GROUND
8
GROUND
9
KEY
10
USB_FP_OC0
1.
Locate the USB2/3 connector on the mainboard.
2.
Plug the bracket cable onto the USB2/3 connector.
3.
Remove a slot cover from one of the expansion slots on the
system chassis. Install an extension bracket in the opening.
Secure the extension bracket to the chassis with a screw.
J6: USB Card Reader Connector (optional)
This connector is for connecting internal USB card reader. You can
use a card reader to read or transfer files and digital images to your
computer.
Pin Signal
Pin
Signal
1
STANDBY 5V
2
USB-
3
USB+
4
GND
5
KEY
The J6 is shared with the lower USB port located near
the Parallel port of the I/O back panel. Please see “I/O
Ports” for more information.
Please check the pin assignment of the cable and the
USB header on the mainboard. Make sure the pin
assignment will match before plugging in. Any
incorrect usage may cause unexpected damage to the
system. The vendor won’t be responsible for any
incidental or consequential damage arising from the
usage or misusage of the purchased product.
SIR1: Infrared Port
The infrared port allows the wireless exchange of information
between your computer and similarly equipped devices such as
printers, laptops, Personal Digital Assistants (PDAs), and other
computers.
