42
ables BIOS to automatically detect the optimal number of block read and
writes per sector that the drive can support and improves the speed of access
to IDE devices.
PWRON After PWR -Fail (Off)
This item enables your computer to automatically restart or return to its last
operating status after power returns from a power failure.
Power Management Setup
This option lets you control system power management. The system has vari-
ous power-saving modes including powering down the hard disk, turning off
the video, suspending to RAM, and software power down that allows the sys-
tem to be automatically resumed by certain events.
Power Management Timeouts
The power-saving modes can be controlled by timeouts. If the system is inac-
tive for a time, the timeouts begin counting. If the inactivity continues so that
the timeout period elapses, the system enters a power-saving mode. If any
item in the list of Reload Global Timer Events is Enabled, then any activity on
that item will reset the timeout counters to zero.
Wake Up Calls
If the system is suspended, or has been powered down by software, it can be
resumed by a wake up call that is generated by incoming traffic to a modem, a
LAN card, a PCI card, or a fixed alarm on the system realtime clock.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI function
[Enabled ]
ACPI Suspend Type
[S1(POS)]
Power Management Option
[User Define]
HDD Power Down
[Disable]
Suspend Mode
[Disable]
Video Off Option
[Suspend --> Off]
Video Off Method
[DPMS Support]
MODEM Use IRQ
[3]
Soft-Off by PWRBTN
[Instant-Off]
IRQ/Event Activity Detect
[Press Enter]
Menu Level
↑
↓
→
←
: Move Enter : Select
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General
Help F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
ACPI Function (Enabled)
This mainboard supports ACPI (Advanced Configuration and Power man-
agement Interface). Use this item to enable or disable the ACPI feature.
