3: BIOS Setup Utility
23
Floppy Drive
Seek
If you enable this item, your system will check all
floppy disk drives at start up. Disable this item
unless you are using an old 360KB drive.
PS/2 Mouse
Support
If this item is set to Enabled, the onboard PS/2
Mouse port will work. Setting this to Disable turns
off the port.
Password Check
If you have entered a password for the system,
use this item to determine if the password is
required to enter the Setup Utility (
Setup
) or
required both at start-up and to enter the Setup
Utility (
Always
).
Boot to OS/2 >
64MB
Enable this item if you are booting the OS/2
operating system and you have more than 64MB
of system memory installed.
Internal Cache
Leave this item enabled since all the processors
that can be installed on this board have internal
cache memory.
System BIOS
Cacheable
If you enable this item, a segment of the system
BIOS will be cached to main memory for faster
execution.
CAS Latency
This item determines the operation of the
SDRAM memory CAS (column address strobe).
We recommend that you leave this item at the
default value. The 2T setting requires faster
memory that specifically supports this mode.
