PCI / Plug and Play Setup Page
31
RTC Alarm
Resume
If this item is enabled, the system can be
resumed from a power-saving mode or a
software power down by an alarm programmed
on the system’s RTC (Realtime Clock). Use the
items which appear below this item to set the
time and date of the alarm.
Primary INTR
If this item is enabled, then all of the system
interrupts (listed below) can be used to
generate power management routines.
IRQ3 to IRQ15
These items are a list of the system interrupts
and a description of the devices which use
them. If you disable the interrupt, it has no
effect on the system power management. If you
set an item to Secondary, any activity on that
interrupt resets the powerdown timeout
counters. If you set an item to Primary, any
activity on that interrupt resets the powerdown
timeout counters and/or resumes the system
from a power saving mode or software power
down.
PCI / Plug and Play Setup Page
This page sets some of the parameters for devices installed on the
system PCI bus, and devices that use the system plug and play
capability.
