Install Memory
11
2.
On the Celeron processor, identify the pin-1 corner by noting
that it has a slight bevel.
3.
On the Socket-370, identify the pin-1 corner. The pin-1 corner
is on the same side as the locking lever, closest to the top of the
lever when it is in the locked position.
4.
Match the pin-1 corners and insert the Celeron processor into
the socket. No force is required and the processor should drop
into place freely.
5.
Swing the locking lever down and hook it under the catch on
the side of the socket. This locks the Celeron processor in the
socket.
If the Celeron processor is installed with a cooling fan assembly,
connect the cable from the fan to the CPU fan power connector
CPUFAN1.
Install Memory
The mainboard has three DIMM slots which can be installed with
memory modules. You must install at least one memory module in
order to use the mainboard. You can install the memory into any of
the DIMM slots.
For this mainboard, you must use 168-pin, 3.3V memory modules
installed with SDRAM memory chips. If you are using a processor
cartridge that runs on a 100 MHz system bus, you must use
memory that operates on a 100 MHz memory bus (PC-100
memory). If you are using a processor cartridge that runs on a 66
MHz system bus, you can use memory that operates on a 66 MHz
memory bus.
DIMM1
DIMM2
DIMM3
