MATSONIC MS7167, Руководство пользователя

Страница: 28 / 57

MS7167 Mainboard User’s Manual
24
Integrated Peripherals Page
This page sets some of the parameters for peripheral devices
connected to the system.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Integrated Peripherals
Item Help
On-Chip IDE Channel0 Enabled
On-Chip IDE Channel1 Enabled
IDE Prefetch Mode Enabled
Primary Master PIO Auto
Primary Slave PIO Auto
Secondary Master PIO Auto
Secondary Slave PIO Auto
Primary Master UDMA Auto
Primary Slave UDMA Auto
Secondary Master UDMA Auto
Secondary Slave UDMA Auto
Init Display First PCI Slot
Onboard FDD Controller Enabled
Onboard Serial Port 1 3F8/IRQ4
Onboard Serial Port 2 2F8/IRQ3
UART 2 Mode Standard
x IR Function Duplex Half
x TX,RX inverting enable No, Yes
Onboard Parallel Port 378/IRQ7
Menu Level
↑↑↑↑ ↓↓↓↓ → → → → ← ← ← ←
: Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit
F1:General Help F5:Previous Values F6:Fail-Safe
Defaults F7:Optimized Defaults
On-Chip IDE
Channel 0,1
Use these items to enable or disable the PCI IDE
channels that are integrated on the mainboard.
Primary/Secondar
y Master/Slave PIO
Each channel supports a master device and a
slave device. These four items let you assign
which kind of PIO (Programmed Input/Output) is
used by IDE devices. You can choose Auto, to let
the system auto detect which PIO mode is best, or
you can install a PIO mode from 0-4.
Primary/Secondar
y Master/Slave
UDMA
Each channel supports a master device and a
slave device. This motherboard supports
UltraDMA and provides faster access to IDE
devices. If you install a device that supports
UltraDMA, change the appropriate item on this list
to Auto. You may have to install the UltraDMA
driver.
Init Display First
Use this item to define if your graphics adapter is