MATSONIC MS7167, Руководство пользователя

Страница: 22 / 57

MS7167 Mainboard User’s Manual
18
Advanced BIOS Features Page
Use this page to set more advanced information about your system.
Take some care with this page. Making changes can affect the
operation of your computer.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Advanced BIOS Features
Item Help
Trend ChipAway Virus Enabled
CPU Internal Cache Enabled
External Cache Enabled
CPU L2 Cache ECC Checking Enabled
Processor Number Feature Enabled
Quick Power On Self Test Enabled
First Boot Device HDD-0
Second Boot Device Floppy
Third Boot Device CDROM
Boot Other Device Enabled
Swap Floppy Drive Disabled
Boot Up Floppy Seek Disabled
Boot Up NumLock Status On
Gate A20 Option Fast
Typematic Rate Setting Disabled
x Typematic Rate (Chars/Sec) 6
x Typematic Delay (Msec) 250
Security Option Setup
OS Select For DRAM > 64MB Non-OS2
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone attempts
to write data into this
area, BIOS will show a
warning message on
screen and alarm beep
↑↑↑↑ ↓↓↓↓ → → → → ← ← ← ← : Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit
F1:General Help F5:Previous Values F6:Fail-Safe
Defaults F7:Optimized Defaults
Trend ChipAway
Virus
This mainboard has built-in virus protection in the
firmware. Use this item to enable or disable the
built-in virus protection.
CPU Internal
Cache
All the processors that can be installed in this
mainboard use internal (level 1) cache memory to
improve performance. Leave this item at the default
value Enabled for better performance.
External Cache
Most processors that can be installed in this system
use external (L2) cache memory to improve
performance. The exceptions are older SEPP
Celeron CPUs running at 266 or 300 MHz. Enable
this item for all but these two processors.
CPU L2 Cache
ECC Checking
This item enables or disables ECC (Error Correction
Code) error checking on the CPU cache memory.
We recommend that you leave this item at the
default value.