35
HDD & FDD
Default: ON
When this item is enabled, it defines system activities which can reset power-
saving mode timeouts to zero, or resume the system from a power saving mode.
This item is for hard disk and/or diskette drive activity.
DMA/master
Default: OFF
When this item is enabled, it defines system activities which can reset power-
saving mode timeouts to zero, or resume the system from a power saving mode.
This item is activity through the system DMA controller.
Wake Up On LAN
Default: Enabled
This item allows you to enable or disable the LAN wake up function that is a
feature of this mainboard. When enabled, traffic through a network will resume
the system from any of the power-saving modes.
Modem Ring Resume
Default: Disabled
This item allows you to enable or disable the modem wakeup function that is a
feature of this mainboard. When enabled, traffic through a fax/modem will
resume the system from any of the power-saving modes.
RTC Alarm Resume
Default: Disabled
This item lets you install a wakeup alarm, which resumes the system from a
power saving mode at a fixed date and time. When the item is enabled, new
items appear which allow you to set the date and time of the alarm.
Primary INTR
Default: On
This item acts like a master switch for all the interrupt items that follow. If this
item is set to ON, the all the following interrupts can be manually configured to
act as resets for the power saving timeouts. If this item is set to OFF, then all the
following interrupt items cannot be used to reset the power saving timeouts.
IRQX
These interrupt events can act as triggers to reset the power saving timeouts or
other system maintenance tasks. If you set an interrupt event to Primary, any
activity on that interrupt will reset the timeouts that use the primary timer (e.g. the
power saving modes). If you set an interrupt to Secondary, then any activity on
the interrupt will reset those timeouts that use the secondary timer (usually
background maintenance tasks). If you set an interrupt event to Disabled, any
activity on the interrupt will not reset the timeouts.
PNP/PCI Configuration Option
This option displays a table of items that configures how PNP (Plug and
Play) and PCI expansion cards operate in your system.
