56
FDD, COM, LPT Port (Disabled)
When this item is enabled, the system will restart the power-
saving timeout counters when any activity is detected on the
floppy disk drive, serial ports, or the parallel port.
PCI PIRQ[A-D]# (Disabled)
When disabled, any PCI device set as the Master will not
power on the system.
PNP/PCI Configuration Option
This option displays a table of items that configures how PnP
(Plug and Play) and PCI expansion cards operate in your
system. Both the ISA and PCI buses on the Mainboard use
system IRQs (Interrupt ReQuests) and DMAs (Direct Memory
Access). You must set up the IRQ and DMA assignments cor-
rectly through the PnP/PCI Configurations Setup utility;
otherwise, the mainboard will not work properly. Selecting
PnP/PCI Configurations on the main program screen displays
this menu:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
PnP/PCI Configurations
Item Help
Reset Configuration Data
[Disabled]
Resources Controlled by
[Auto(ESCD)]
x IRQ Resources
[Press Enter]
PCI/VGA Palette Snoop
[Disabled]
Menu Level
Default is Disabled. Select
Enabled to reset Extended
System Configuration
Data (ESCD) when you
exit Setup if you have
installed a new add-on
and the system reconfigu-
ration has caused such a
serious conflict that the
OS cannot boot.
↑↑↑↑
↓↓↓↓
→
→
→
→
←
←
←
←
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
Reset Configuration Data (Disabled)
If you enable this item and restart the system, any Plug and
Play configuration data stored in the BIOS setup is cleared
from memory. New updated data is created.
