29
Install the Memory Modules
For this mainboard, you must use 168-pin 3.3V non-buffered Dual In-line
Memory Modules (DIMMs). The memory chips must be standard or
registered SDRAM (Synchronous Dynamic Random Access Memory).
The memory bus can run at 66 MHz, 100 MHz or 133 MHz. If your
processor operates over a 100 MHz system bus, install PC100 or PC-
133 memory that operates over a 100 MHz or 133 MHz bus. If you install
a processor that operates over a 66 MHz bus, you can install memory
chips that operate at 66 MHz.
You must install at least one memory module. You can install the
memory module in either DIMM1 or DIMM2. Each module may be
installed with up to 256 MB of memory so the maximum capacity is 512
MB. The mainboard supports memory chips that have EC (Error
Correction) or ECC (Error Correction Code).
1. Locate the DIMM slots on the mainboard.
Locking latches
Memory module
DIMM1
DIMM2
