3
Page
3
of
6
Rev: 1.3
INSTALLATION INSTRUCTIONS
Locate the charger in a suitable position in the vehicle - although the charger is splash resistant, place it in a
dry area
DO NOT install the charger in the engine bay
Ensure charger is wired closer to the main battery than the auxiliary battery
Secure the charger with brackets and screws
MA20DC and MA20DCS Chargers
Output cables:
1.
Connect the Red (positive) ring to the Red (positive) terminal on the auxiliary battery
2.
Connect the Black (negative) ring to the Black (negative) terminal on the auxiliary battery
Input cables:
1.
Connect the Blue (Positive) ring to the Red (positive) terminal on the main cranking battery
2.
Connect the Black (negative) ring to the Black (negative) terminal on the main cranking battery
SOLAR INPUT - MA20DCS ONLY
1.
Connect the Solar cable (yellow) to the solar panel positive cable. When voltage reaches 12.8v, the charger
will start operating.
NOTE: When installed - check all connections for fit and tightness.
MA20DCS
Содержание MA20DC
Страница 5: ...3 Page 5 of 6 Rev 1 3 SCHEMATIC DIAGRAMS...
