Matrox graphics card – User Guide
3
3
Insert your Matrox card
a
Remove the cover for the slot you intend
to use.
b
Save the screw for the mounting
bracket. Position your Matrox card over
the expansion slot you’ve chosen.
c
Push the card in firmly and evenly until
it’s fully seated in the slot.
d
Replace the screw to secure the bracket
of your Matrox card to the computer
frame.
Your Matrox card is now installed.
Before restarting your computer,
connect your monitor or
monitors (
see “Connection setup”, page 4
).
After connecting,
restart your computer and install your
Matrox software (
see “Software setup”, page 7
).
WARNING:
Inserting your Matrox card
into the wrong type of slot could damage
your card, your computer, or both.
PCI card
32-bit
64-bit
AGP card
WARNING:
If your computer doesn’t restart after your graphics card is installed, turn off
your computer to avoid damaging electronic parts. For troubleshooting information,
see
page 9
.
