manualshive.com logo in svg

Matrox Matrox Radient eV-CXP, Установка и справочник по оборудованию, Страница: 60 / 70

Поделиться
Скачать
Matrox Matrox Radient eV-CXP Скачать руководство пользователя страница 60

60   Appendix B: Technical information

Board status LEDs

Matrox Radient eV-CXP has four board status LEDs to indicate the status of each 
of the following: power, the board configuration, the PCIe (Host) slot, and the 
firmware.

The table below outlines the possible colors for each LED, and their definitions.

LED type

LED color and state Description

1. Power

Off/Red

One or more of the on-board voltage regulators did not start. 

If your computer is on and this LED state occurs, there is an 

issue with the voltage regulators on your Matrox 

Radient eV-CXP. Please contact Matrox technical support.

Green

All of the on-board voltage regulators are working properly.

2. Board

Red

The board is not configured.

Green

The board is configured.

3. PCIe slot

Off

The type of slot cannot be established. The PCIe link is 

down.

Blinking red

Slot is PCIe 1.x, x1

Blinking orange

Slot is PCIe 1.x, x4

Blinking green

Slot is PCIe 1.x, x8

Solid red

Slot is PCIe 2.x, x1

Solid orange

Slot is PCIe 2.x, x4

Solid green

Slot is PCIe 2.x, x8

4. Firmware status

Off

The firmware is OK.

On

The firmware is corrupted. Fall-back firmware is being used.

Power
Board
PCIe slot
Firmware

LEDs

1

4

3

2

1

2
3
4

Содержание Matrox Radient eV-CXP







































































Отзывы:

Нет отзывов