Matrox Extio 3 Series, Руководство пользователя

Страница: 17 / 111

Matrox Extio 3 Series – User Guide 17
VPN configuration
To configure the VPN IPSec connection on the receiver, the network administrator as well as the
remote user must perform the tasks described in this section.
Generate the VPN configuration file (network administrator)
Matrox Extio 3 uses Strongswan 5.8.4 IPsec VPN in tunnel mode.
The network administrator must do the following:
1 Generate a swanctl file for Strongswan 5.8.4. in the JSON format (2.1) and name it
swanctl.json
. Note : Matrox then converts swanctl.json to swanctl.conf internally. Matrox
provides a template JSON file ( swanctl-template.json ) that lists all supported parameters
with their default values when omitted. For more information, see “Appendix E - File
structure for swanctl.json”, page 99 .
2 Next, create a “.zip” configuration file containing the s wanctl.json file, and optionally the
certificates and private keys in their respective swanctl sub-folders. For more
information,
see “File structure for the VPN configuration file (strongswan.zip)”,
page 23 .
3
Name the file
strongswan.zip .
This file must not be password protected.
4
Place the file in the root of the first partition of a USB mass storage device. Note : The
USB mass storage device needs to be formatted as FAT32.
5
Make the USB mass storage device available to the remote user.
The remote user has to import this VPN configuration file into the Extio3 receiver unit using the USB
mass storage device.