Matrox DigiSuite LE, Руководство по установке, Страница: 82 / 140

70
Chapter 5, Configuring Your DigiSuite LE and VTR Settings
Configuring the audio output pairs
To configure your audio output pairs, click the
DigiSuite LE
tab, then the
Audio Out
tab.
Important
Both audio output pairs must be either analog or digital.
Digital audio is available only with the optional digital module.
q
Analog Output
or
Digital Output
Select the option that matches the
type of audio output you’re using.
q Output Pair 1
and
Output Pair 2
Use these lists to select your
default audio output pairs. For example, to use the recorder connected
to your unbalanced analog OUT 1 and OUT 2 outputs, set
Output
Pair 1
to
RCA (unbalanced analog)
.
To ensure that your balanced analog output is properly calibrated for
your recorder, make sure you select the option that matches your
recorder’s audio input impedance. For example, if the audio input
impedance of your recorder is set to 600
Ω
, select XLR 600 Ohms
(balanced analog) . If your recorder has a high-impedance audio input
load, select
XLR High Impedance (balanced analog)
.
Note Refer to your VTR’s documentation for instructions on how to
set its audio input impedance. If you’re unsure of your VTR’s setting,
select
XLR High Impedance (balanced analog)
.