Matrox CronosPlus, Установка и справочник по оборудованию

Страница: 36 / 48

36 Appendix B: Technical information
Video input connector
The video input connector is a standard 25-pin, D-SUB male connector that is
located on the module’s bracket.The connector is used receive video input, send
or receive user signals, and receive a trigger input signal.
To build your own cable, parts can be purchased from::
Pin Signal I/O Description
1 USERBIT0 I TTL user signal 0. This signal can only be an input signal.
It can also generate an interrupt.
2 USERBIT1 I TTL user signal 1. This signal can only be an input signal.
4 USERBIT5 O TTL user signal 5. This signal can only be an output signal.
5 USERBIT3 O TTL user signal 3. This signal can only be an output signal.
7 O I Opto-isolated trigger input (positive).
9 CHROMA I Chrominance.
11 VID_IN2 I CVBS2.
13 VID_IN0 I CVBS0 or Y.
14 USERBIT2 I TTL user signal 2. This signal can only be an input signal.
16 USERBIT6 O TTL user signal 6. This signal can only be an output signal.
17 USERBIT4 O TTL user signal 4. This signal can only be an output signal.
19 OPTOTRIG- I Opto-isolated trigger input (negative).
22 VID_IN3 I CVBS3.
24 VID_IN1 I CVBS1.
3, 6, 8, 10, 12, 15,
18, 20, 21, 23, 25 GND - Ground.
Manufacturer Amphenol
Connector P/N ED-B-25-S
Backshell P/N 17-1726-2
Pin 13
Pin 25
Pin 1
Pin 14