Matrox ATC PCI, Руководство пользователя

Страница: 7 / 38

Matrox ATC – User Guide 7
1
Connect your main monitor
Connect your BNC cable to the main
connector (
A
) of your Matrox card.
Connect the BNC connectors on your BNC
cable to your analog monitor.
2
Connect your secondary
analog monitor (optional)
Connect your analog computer monitor to
the secondary connector (
B
) of your Matrox
graphics card.
If your monitor cable has a DVI connector,
connect it directly to the secondary
connector of your Matrox graphics card.
If your monitor cable has an HD-15 connector, use the DVI-to-HD15 adapter included with
your Matrox product to connect your monitor to the secondary connector.
Make sure the connectors are firmly in place. Your Matrox card is now installed. Restart your
computer and install your Matrox software (
see “Software setup”, page 9 ).
BNC cable
Note: When connecting the BNC
connectors on your BNC cable to your
monitor, make sure the Red (
R
), Green
(
G
), Blue (
B
), Horizontal Sync (
H
– gray
wire), and Vertical Sync (
V
– black wire)
connections are firmly in place and
plugged into the correct input.
Note: To use a monitor with a DVI
connector as your secondary monitor,
make sure it supports analog input. For
more information, see your monitor
documentation.
Monitor cable
(DVI)
DVI-to-HD15
adapter
Monitor cable (HD-15)