background image

3

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INFORMATION

It is the sole responsibility of the purchaser of Matrix products to instruct all individuals, whether they are the end user or 
supervising personnel on proper usage of the equipment.

It is recommended that all users of Matrix exercise equipment be informed of the following information prior to its use.

PROPER USAGE

Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that Matrix 
equipment be used properly to avoid injury.

Keep hands and feet clear at all times from moving parts to avoid injury.

CHECK FOR DAMAGED PARTS

1.  DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by 

your country’s local Matrix dealer. 

2.  MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information.  

If unreadable or missing, contact your Matrix dealer for a replacement. 

3.  SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. 

This must be performed by a licensed contractor. 

4.  MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your 

liability to a minimum. Equipment needs to be inspected at regular intervals. 

5.  Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.  

Matrix dealers will provide service and maintenance training at our corporate facility upon request. 

 

Содержание VS-S70





























Отзывы: