Matrix T130 X, Руководство пользователя

Страница: 4 / 24

4
TOOLS REQUIRED:
F
8mm T-Wrench
F
5mm Allen Wrench
F
6mm Allen Wrench
F
Phillips Screwdriver
PARTS INCLUDED:
F
1 Base Frame
F
2 Console Masts
F
2 Console Mast Brackets
F
1 Console Assembly
F
2 Handlebar Covers
F
1 Power Cord
F
1 Hardware Kit
Console packaged separately
ASSEMBLY
UNPACKING
Unpack the equipment where you will be using it. Place the carton on a level flat surface. It is recommended
that you place a protective covering on your floor. Never open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded.
Several parts have been pre-lubricated to aid in assembly and usage. Please do not wipe this
off. If you have difficulty, a light application of lithium grease is recommended.
Before proceeding, find the serial numbers located on barcode stickers and enter them in the spaces provided below.
CONSOLE SERIAL NUMBER
FRAME SERIAL NUMBER
MODEL
F
T130 X
F
T130 XI MATRIX TREADMILL
* Use the information above when calling for service.
SERIAL NUMBER LOCATIONS
WARNING!
There are several areas during the assembly process that special
attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If
the assembly instructions are not followed correctly, the equipment could
have parts that are not tightened and will seem loose and may cause
irritating noises. To prevent damage to the equipment, the assembly
instructions must be reviewed and corrective actions should be taken.
NEED HELP?
If you have questions or if there are any missing parts, contact Customer
Tech Support. Contact information is located on the information card.
ENGLISH