Matrix SIMADO GFXD1111S, Системное руководство

Страница: 91 / 194

Matrix SIMADO GFXD1111S V3 System Manual 85
Metering on FXS Port
Simado GFXD1111S supports billing facility in the form of 'Metering pulses' in case a billing equipment is connected
to the FXS Port of the system to generate the accurate bills. For this purpose, the metering pulses of 12/16 KHz are
generated by the system on the FXS Port.
This parameter is applicable only for OG calls made from FXS Port. Metering pulses are generated on the FXS Port
when the call gets matured. If PCO application is enabled, the system will match the number dialed on the FXS Port
with the entries in the database of the PCO application. If the number matches any of the entry in the PCO
application database then the system will wait for other port to get mature and then will generate the metering pulse
on FXS Port as per the programmed value for that port.
Metering Pulse on FXS Port can be generated in one of the following forms:
• None: It is used when no billing information is to be generated on FXS Port.
• 12 KHz Metering Pulse: It is used when billing equipment connected to FXS Port can detect only 12 KHz
metering pulse.
• 16 KHz Metering Pulse: It is used when billing equipment connected to FXS Port can detect only 16 KHz
metering pulse.
How to Program?
Use following command to program the metering pulse type to be generated on FXS Port:
223-Code-#*
Where,
By default, it is None.
Use following command to program the Pulse Width for 12/16 KHz pulse:
501-Pulse Width-#*
Where,
Pulse Width is from 001 to 255 (001 = 10 ms.)
By default, it is 010 (100ms).
If Answer Supervision Signal on FXO is set to 12/16 KHz, FXS will not generate metering pulse in FXS-
FXO call.
Relevant Topics:
1.
“PCO Application” 99
2.
“Port Parameters-FXS” 116
3.
“Port Parameters-FXO” 111
Code Meaning
0 None
1 12 KHz Metering Pulse
2 16 KHz Metering Pulse