82
Matrix SETU ATA211 System Manual
If the number to be dialed out is <dialednumber@destination address>, for example, [email protected],
you must enter 1234 in this field.
•
In the
Name
field, enter a name to identify the number string you configured. It may be the name of
your contact or any name you wish to assign to the number string. The name may consist of 24
characters (maximum). Default: Blank.
The name you configure here will not be used in SIP signaling.
•
As
Minimum Digits
, define the minimum length of the number string that must be dialed for the system
to consider it as a valid number. Default: 01.
•
As
Maximum Digits
, define the maximum length of the number string that must be dialed out for the
system to consider it the complete number string. Default: 24.
•
In the
Destination Address
field
,
enter the domain name or IP Address to where the call is to be
placed. The Destination Address may consists of up 40 characters (maximum). Default: Blank.
For example, if the peer-to-peer number to be dialed out is [email protected], enter abc.com as
Destination Address. If the number is 1234@ 192.168.1.197, enter 192.168.1.197 as the Destination
Address. The Destination Address can also be in the form of Address: Port number.
5.
Click
Submit
to save your entries.
You may log out of Jeeves.
Making Peer-to-Peer Calls
To make a Peer-to-Peer Call:
•
Go Off-hook.
•
Dial the IP Address of the remote party or the number of the remote party stored in the Peer-to-Peer Table.
•
To dial an IP Address, press * key (star/asterisk).
For example, to call the IP Address 192.168.200.200, dial 192*168*200*200.
When you press the * key it is interpreted by the SETU ATA211 as a '.' (dot/period).
•
Talk, when the remote party answers the call.
http://arttel.ru
http://arttel.ru/shop/voip-shlyuzy/golosovoj-shlyuz-matrix-setu-ata211
