Matrix R5x-04 Скачать руководство пользователя

Страница: 6 / 76

CAUTioN!

if you experience chest pains, nausea, dizziness,

or shortness of breath, stop exercising immediately and con-

sult your physician before continuing.

CAUTioN!

any changes or modifications to this equipment

could void the product warranty.

2.1 ReAD AND SAVe THeSe iNSTRUCTioNS

To ensure your safety and protect the equipment, read all

instructions before operating the MATRIX R5x-04 Bike.

To ensure proper use of the Matrix R5x-04 Bike, make sure that all

users read this manual. Remind the users that before undertaking

any fitness program, they should obtain complete physical

examinations from their physicians. If, at any time while exercising,

the user experiences dizziness, pain, or shortness of breath,

nausea or feels faint, he or she must stop immediately.

* this bike is only to be used for its intended purpose described

in this manual. Do not use attachments that have not been recom-

mended by matrix.

* never drop or insert objects into any opening. Keep hands away

from moving parts. if the item cannot be reached, contact a matrix

authorized dealer for assistance.

* never operate the unit if it is damaged, not working properly, when

it has been dropped, or has been dropped in water.

* Keep hands and feet clear at all times from moving parts to avoid

injury.

* Do not use this product outdoors, near swimming pools or in areas

of high humidity.

* Do not operate where aerosol (spray) products are being used or

when oxygen is being administered.

* Do not use this product in bare feet. Do not wear shoes with heels,

leather soles, cleats, or spikes while exercising.

* Do not remove the side covers. service should only be done by an

authorized service technician.

* Close supervision is necessary when used near children, invalids,

or disabled people.

* When the bike is in use, young children and pets should be kept at

least 3 meters / 10 feet away.

* assemble and operate the bike on a solid, level surface.

* never face backward while using the matrix r5x-04 bike.

* use the stationary handlebars when mounting or dismounting the

bike.

* Do not wear clothing that might catch on any moving parts of this

bike.

CHAPTeR 2: iMPoRTANT SAfeTy iNSTRUCTioNS

Содержание R5x-04













































































Результаты поиска

Содержание R5x-04

Отзывы:

Похожие инструкции для R5x-04

Бренды по названию

Популярные бренды

Matrix R5x-04, Руководство по обслуживанию

Результаты поиска

Содержание R5x-04

Отзывы:

Похожие инструкции для R5x-04

Бренды по названию

Популярные бренды