24
4.7 Mounting the carrying belt system
Assembly 7
Assembly
Checks before use:
Distance from the shoulder strap suspension
to the cutting tool min. 750mm Distance
of the cutting tool from the ground when
using as trimmer 0-300mm and when using
with thicket knife 100-300mm. The fuel tank
should be filled up to half with normal or
premium petrol with 93 octane or higher.
Always keep a safe distance between yourself
and the cutting tool while working.
The petrol brush cutter / trimmer / pole-
mounted powered pruner unit must be
used with the carrying strap (13). First of all,
balance the machine when it is switched off.
- Put on the carrying strap (13).
- Adjust the strap length in such a way that
the snap hook (b) is about a hand's breadth
below the right hip.
- Hang the petrol brush cutters on the snap
hook (karabiner).
- Let the machine sway.
The cutting tool may just touch the ground
during normal working posture.
With the engine running, attach the device to
the snap hook (b) of the harness.
Safety flap on the shoulder strap
CAUTION!
In an emergency, the safety flap
(c) can be pulled on the carrying strap (13).
The machine is then released immediately
from the shoulder strap (13) and falls to the
ground.
A13
c
