
8
Changing a programme
It is possible to change the programme, if necessary, once the
programme has started.
•
First open the door slightly to reduce the risk of water spillage.
•
Press the “Programme Selection” button until the required programme is
shown on the display.
•
Close the door. The dishwasher will begin the new programme from
the point at which the old programme stopped.
Cancelling a programme
It is possible to cancel a programme once is has started.
•
First open the door slightly to reduce the risk of water spillage.
•
Press and hold in the “Programme Selection” button until the “End of
Programme” indicator flashes.
•
Close the door. The dishwasher will run a drain cycle which will take
approximately 30 seconds. Once this is complete, the dishwasher will
beep five times and the “End of Programme” light will switch on.
Switching the dishwasher off
•
Once the dishwasher beeps five times and the “End of Programme”
light switches on, the dishwasher can be switched off by pressing the
“Power” button.
Please note: The dishwasher will automatically continue on the
programme it has started if the door is opened or in the event of a
power cut.