12
If the hardness of the water you use is above 63dE, or if you are using
well water, you are recommended to contact your local water board to
confirm the water hardness level and to use filter and water refinement
devices.
Please note: The water hardness is preset to level “3”.
To change the hardness setting
•
Press and hold down the “Programme Selection” button.
•
Press the “Power” button to switch on the dishwasher.
•
Keep the “Programme Selection” button pressed until all “Programme
Indicator” lights and the “End of Programme” indicator light flash.
•
To adjust the level, press the “Programme Selection” button until the
required level is shown on the display: The “Programme” lights will
illuminate as in the table below.
•
To store the selected water hardness level, press the “Power” button.
Rinse aid
Rinse aid helps to ensure better quality wash results and increased
drying performance.
To fill the rinse aid compartment, open the rinse aid compartment lid.
Fill the compartment with rinse aid to the MAX level and then close
the
lid. Be careful not to overfill the rinse aid compartment and ensure that
you wipe up any spillages.
Water hardness level
British hardness dE
Indicator lights illuminated
1
0-6
P1
2
7-14
P2
3
15-21
P3
4
22-28
P4
5
29-39
P1 and P4
6
40-63
P2 and P4
Fig. 6